Epoxy Flooring Dallas-Fort Worth | Texas Stone Craft
Texas Stone Craft installs epoxy and polyaspartic floor coatings across Dallas-Fort Worth for garages, workshops and showrooms. Basic solid-color epoxy runs $3-$5 per square foot, decorative flake $5-$7, full polyaspartic flake $6-$9 and metallic $8-$12. Polyaspartic takes foot traffic in 4-6 hours and vehicles in about 24 hours. Epoxy needs 3-7 days before you park on it.
| Service | Epoxy and polyaspartic floor coatings for garages, workshops, showrooms and light commercial slabs |
|---|---|
| Service area | Dallas-Fort Worth metroplex, with dedicated city pages for Dallas, Fort Worth, Plano, Frisco, Keller, Flower Mound and Southlake |
| Typical price range | $3-$5 per sq ft basic epoxy, $5-$7 decorative flake, $6-$9 polyaspartic flake, $8-$12 metallic |
| Typical timeline | One day for a polyaspartic install, with foot traffic the same day and vehicles in about 24 hours. Epoxy needs 24-48 hours for foot traffic and 3-7 days for vehicles. |
| Materials | Two-part epoxy, polyaspartic topcoats, vinyl flake broadcast and metallic pigments over diamond-ground concrete |
| Permits | DFW cities tie permits to electrical, plumbing, mechanical and structural work. A coating changes none of them; your city's permit office can confirm the rule where you live. |
| Heat performance | Polyaspartic is formulated to resist hot tire pickup, so hot tires off a Texas driveway do not lift it. Traditional epoxy can soften and mark. |
| Warranty | 5-year workmanship warranty |
| Why polyaspartic instead of epoxy | It cures in hours instead of days, resists hot tire pickup, and does not yellow under UV |
Professional Epoxy & Polyaspartic Flooring in Dallas-Fort Worth
Professional epoxy flooring in Dallas-Fort Worth for garages, basements, workshops, and commercial spaces. Texas Stone Craft installs both traditional epoxy and advanced polyaspartic systems. Which one fits depends on your slab, how hard the garage gets used, and what you want to spend.

For garage floor coatings in most Texas garages, we recommend polyaspartic. It goes down in one day and holds up better than traditional epoxy. The sections below lay out the differences so you can decide for yourself.
Want to preview finishes before choosing a system? Try our Epoxy Floor Visualizer to upload your space and explore flake-pattern options before requesting your quote.
Epoxy Flooring Service Areas in DFW
We install epoxy and polyaspartic floors across DFW. Each city page below covers local pricing, neighborhoods and project examples for that area.
Epoxy Flooring by City
- Epoxy Flooring Dallas — premium garage floor upgrades, hot-tire resistance, and fast-turn installs for Dallas homeowners
- Epoxy Flooring Plano — HOA-aware, family-friendly garage floor systems with same-day polyaspartic options
- Epoxy Flooring Frisco — luxury garage finishes and performance-first polyaspartic systems backed by comparison data
- Epoxy Flooring Fort Worth — durable coatings for garages, workshops, trucks, and light commercial spaces
- Garage Floor Coatings Keller — polyaspartic and flake coatings for family homes on larger Tarrant County lots
- Epoxy Flooring Flower Mound — garage floor epoxy and polyaspartic for newer builder slabs in Denton County
- Epoxy Flooring Southlake — polyaspartic, flake and metallic coatings for three- and four-bay Southlake garages
If you are researching city-specific pricing, permit expectations, neighborhood fit, or project examples, start with the local pages above. If you want the full product and process overview, use this main DFW hub page.
Polyaspartic vs Epoxy: What's the Difference?
Polyaspartic Floor Coatings (Recommended)
Polyaspartic is a urethane chemistry, and it beats epoxy where a Texas garage is hardest on a floor:
Key Benefits:
- One-Day Installation: Walk on it the same day, park in about 24 hours
- Hot Tire Resistant: Won't soften or mark from hot tires
- UV Stable: Resists the sun yellowing standard epoxy shows
- Durability: Lasts years longer than epoxy
- Chemical Resistant: Stands up to oil, gasoline, brake fluid and road salt
- Flexible: Moves with the slab through temperature swings
Best For: Residential garages, showrooms, high-traffic areas
Traditional Epoxy Floor Coatings
Epoxy costs less up front and still does the job in the right room:
Key Benefits:
- Lower Price: Costs less on day one
- Multiple Options: Solid colors, flakes, metallics
- Chemical Resistant: Stands up to most fluids
- Seamless Finish: No joints, and it mops clean
Limitations:
- Takes 3-5 days before full use
- Can yellow over time with UV exposure
- May soften from hot tires (140°F+)
- Less flexible than polyaspartic
Best For: Basements, workshops, commercial spaces without hot tire concerns
Why Texas Garages Need Polyaspartic
Dallas-Fort Worth presents unique challenges for garage floors:
The Hot Tire Pickup Problem
Texas garage temperatures regularly exceed 130°F in summer. When you park after highway driving, tire temperatures can reach 150-180°F. Traditional epoxy softens at these temperatures, causing:
- Visible tire marks and tracks
- Surface peeling where tires contact floor
- Expensive professional cleaning or recoating
- Frustration and disappointment
Polyaspartic Solution: Formulated to resist hot tire pickup (Deco-Crete data sheet).
UV Exposure & Yellowing
Garages with windows or open doors get UV exposure. Traditional epoxy yellows within 6-12 months when exposed to sunlight, creating unsightly discoloration.
Polyaspartic Solution: The formula is UV-stable and does not yellow, however long the door stays open.
Time is Money
Traditional epoxy requires 3-5 days before you can park vehicles. Polyaspartic installs in one day. You walk on it the same day and park in about 24 hours.
Polyaspartic Advantage: Park your cars about 24 hours after install.
Why Homeowners Upgrade Instead of Recoating Failing Epoxy
Many of our best epoxy leads are not first-time installs. They come from homeowners whose previous coating failed from poor preparation, hot tire pickup, moisture issues, or outdated epoxy chemistry.
Common Reasons Existing Garage Floors Fail
- Inadequate grinding or prep before installation
- Moisture vapor issues ignored during bid stage
- Low-grade topcoats that yellow near garage doors
- Thin systems that scuff, peel, or wear through quickly
- Epoxy selected where same-day polyaspartic would have been the better fit
When we inspect a failed garage floor, we look at slab condition, previous coating thickness, moisture risk, UV exposure, vehicle use, and how quickly you need the space back in service. That lets us recommend either a value-focused epoxy rebuild or a premium polyaspartic upgrade that solves the root problem.
Types of Floor Coating Systems
Solid Color Systems
One color, wall to wall. It is our lowest-priced colored system and still looks clean and finished. We install it in epoxy or polyaspartic.
Features:
- One color, wall to wall
- Smooth or light texture
- Sweeps and mops clean
- Clean, finished look
- Several colors to choose from
Typical Cost: $3-5 per square foot
Flake Systems
Decorative flakes broadcast into wet coating for texture and visual interest. Most popular choice for residential garages. Hides minor imperfections.
Features:
- Full or partial flake coverage
- Unlimited color combinations
- Slip-resistant texture
- Forgiving finish
- Custom patterns possible
Typical Cost: $4-7 per square foot
Metallic Systems
We work metallic pigment into the coating by hand, so the pattern never repeats. Showrooms and high-end garages pick this one. No two floors match.
Features:
- Metallic pigments
- Marbled swirl pattern
- Depth that reads as 3D under light
- Modern look
- Custom color blends
Typical Cost: $8-12 per square foot
Clear Protective Coats
Transparent protection over existing floors. Protects and seals concrete without changing appearance. Quick, economical solution.
Features:
- Keeps the bare-concrete look
- Stops the slab from dusting
- Blocks chemical stains
- Mops clean
- Lowest price of any system here
Typical Cost: $2-3 per square foot
Benefits of Professional Floor Coatings
Extreme Durability
Resists impacts, chemicals, and heavy traffic:
- Vehicle traffic daily
- Dropped tools and equipment
- Chemical spills
- Tire marks and scuffs
- Decades of use
Easy Maintenance
Soap and water does it:
- No special cleaners
- Stains sit on top instead of soaking in
- Spills wipe up
- A regular sweep handles most of it
- Little upkeep beyond that
Chemical Resistant
Stands up to automotive fluids:
- Motor oil and transmission fluid
- Antifreeze and coolant
- Gasoline and diesel
- Battery acid
- De-icing salts
Seamless Surface
No grout lines or joints for dirt to pack into:
- One continuous surface
- No cracks or crevices to hold grime
- Clean, modern look
- Finished edges
- Quick to sweep and mop
Slip Resistant
We can add anti-slip grit to the topcoat:
- Textured finishes
- Aggregate mixed into the topcoat
- Better footing when wet
- Meets safety codes
- More or less grit depending on the room
Cost Effective
You pay for it once and it keeps working:
- 20+ year lifespan (polyaspartic)
- Little spent on upkeep
- Protects the concrete slab underneath
- One-time installation
Perfect Applications
Residential Garages
We coat garages from one bay to three:
- Single, double and triple car garages
- Workshop areas
- Hobby spaces
- Man caves
- Storage areas
Basement Floors
Moisture-resistant flooring solution:
- Finished basements
- Recreation rooms
- Home gyms
- Storage areas
- Utility rooms
Commercial Spaces
Professional flooring for businesses:
- Auto dealerships and showrooms
- Retail stores
- Restaurants (kitchen areas)
- Warehouses
- Manufacturing facilities
Showrooms, Gyms & Flex Spaces
We also coat rooms where the floor has to look good and take a beating:
- Home gyms and fitness studios
- Car storage and collector garages
- Motorcycle and powersports garages
- Retail display areas
- Office warehouse flex suites
These spaces benefit from metallic systems, decorative flake finishes, and UV-stable topcoats that deliver both performance and presentation.
Cost Ranges by Coating Type and Use Case
Every floor is priced by slab condition, square footage, prep requirements, moisture risk, and finish system. The ranges below help set expectations before an on-site quote.
Residential Garage Floor Pricing
- Basic epoxy solid color: $3-$5 per sq ft
- Decorative flake epoxy system: $5-$7 per sq ft
- Full polyaspartic flake system: $6-$9 per sq ft
- Metallic polyaspartic system: $8-$12 per sq ft
What Can Increase Price
- Heavy grinding to remove failed coatings
- Crack, spall, or pitting repair
- Moisture mitigation primers
- Stem wall coating or curb detailing
- Custom flake blends or metallic effects
- Commercial scheduling or phased installation
Why Polyaspartic Often Wins on Total Value
Even when the initial quote is higher, polyaspartic often wins on total ownership cost because it reduces downtime, avoids repeat recoating cycles, and holds up better under heat, UV, and daily vehicle use in North Texas.
Specialty Applications
Unique flooring needs:
- Aircraft hangars
- Kennels and veterinary clinics
- Locker rooms
- Commercial kitchens
- Healthcare facilities
Our Installation Process
Step 1: Free Consultation & Estimate
Meet at your property to:
- Assess concrete condition
- Discuss coating options
- Review color choices
- Provide detailed pricing
- Answer questions
Step 2: Surface Preparation (Critical for Success)
Proper prep ensures lasting results:
- Diamond grinding to open concrete pores
- Crack and damage repair
- Thorough cleaning and degreasing
- Moisture testing
- Profile verification
Note: Surface preparation is 80% of a successful installation. We never skip this step.
Step 3: Primer Application
Bonding coat for maximum adhesion:
- High-penetration primers
- Seals concrete surface
- Ensures coating bond
- Prevents delamination
Step 4: Base Coat Application
Main coating layer:
- Professional mixing
- Proper thickness application
- Even coverage
- Quality control
Step 5: Decorative Elements (If Applicable)
Add flakes or metallic effects:
- Broadcast flakes uniformly
- Scrape excess material
- Create metallic patterns
- Ensure even distribution
Step 6: Topcoat Application
Clear protective layer:
- UV-resistant topcoat
- Chemical protection
- Enhances gloss
- Seals and protects
- Anti-slip additives if specified
Step 7: Cure & Final Inspection
Allow proper curing:
- Polyaspartic: 4-6 hours to full cure
- Epoxy: 24-48 hours foot traffic, 3-7 days vehicle traffic
- Final walkthrough
- Maintenance instructions
- Warranty documentation
Epoxy Floor Projects in Plano and Frisco
Two of our project write-ups show these systems in DFW garages:
Plano Same-Day Garage Transformation
See how a failed garage floor was removed, rebuilt, and recoated in a single day in our Plano case study.
- Same-Day Polyaspartic Garage Transformation in Plano
- More on Plano garage floors: Epoxy Flooring Plano
Polyaspartic vs Epoxy in Frisco
See how traditional epoxy and polyaspartic compare for a Frisco garage.
- How polyaspartic and epoxy compare in Frisco garages
- More on Frisco garage floors: Epoxy Flooring Frisco
Why Choose Texas Stone Craft
Experienced Installation Team
Trained installers who prep and coat every floor to the same protocol. We know Texas concrete and climate challenges.
Premium Materials
We install professional-grade coatings only:
- Industrial-strength resins
- UV-resistant topcoats
- Commercial-grade primers
- Top-grade flake and metallic pigments
Proper Surface Preparation
Never rush the prep work. Diamond grinding and thorough cleaning ensure lasting bond and performance.
Warranty Protection
Every floor carries our 5-year workmanship warranty, in writing. If a problem comes back to how we installed it, we come back and fix it.
Honest Recommendations
We'll recommend polyaspartic when it's the right choice, even though epoxy has lower upfront cost. Your long-term satisfaction matters more than a quick sale.
Maintenance & Care
Daily/Weekly Care
- Sweep or blow debris regularly
- Wipe up spills promptly
- Mop with mild soap and water as needed
- Avoid abrasive cleaning tools
What to Avoid
- De-icing salts: Use sand instead in winter
- Metal snow shovels: Use plastic or rubber
- Harsh chemicals: Stick to mild cleaners
- Abrasive pads: Use soft mops and cloths
Long-Term Maintenance
- No resealing needed with polyaspartic or epoxy topcoats
- Minor repairs: Easily patched if damaged
- Refresh topcoat: After 15-20 years if desired (optional)
Service Areas
We install professional floor coatings throughout Dallas-Fort Worth:
Primary Areas:
- Dallas
- Fort Worth
- Plano
- Frisco
- McKinney
- Allen
- Prosper
- Southlake
- Keller
- Colleyville
- Grapevine
- Trophy Club
- Flower Mound
- Lewisville
- Carrollton
- The Colony
- Denton
- Little Elm
Extended Service:
- Arlington
- Grand Prairie
- Irving
- Mansfield
- Burleson
- Weatherford
- Rockwall
- Wylie
Where We Install Epoxy Most Often
Most of our epoxy and polyaspartic jobs land in four cities:
- Dallas: premium garage floor upgrades
- Plano: same-day family garage floors that meet HOA rules
- Frisco: luxury garages and polyaspartic systems built for hot tires
- Fort Worth: hard-working garages, workshops and light commercial floors
We'll come out, check the slab and price the coating system that fits it.
Contact Texas Stone Craft for a free consultation and estimate.
Related Services
- Concrete Overlays — Decorative concrete resurfacing
- Stamped Concrete — Outdoor decorative concrete
- Outdoor Living Spaces — Complete backyard upgrades beyond the garage
Featured Projects
See how polyaspartic and epoxy compare in Frisco garages.
Read about our Same-Day Polyaspartic Garage Transformation in Plano.
Learn More
Read our blog post on Polyaspartic vs Epoxy Garage Flooring.
Preview coating styles online with our Epoxy Floor Visualizer.
Explore local epoxy service pages:
- Epoxy Flooring Dallas
- Epoxy Flooring Plano
- Epoxy Flooring Frisco
- Epoxy Flooring Fort Worth
- Garage Floor Coatings Keller
- Epoxy Flooring Flower Mound
- Epoxy Flooring Southlake
Get a written estimate
Tell us about your project and we will set up a time to look at the site and price it. Request an estimate or call (469) 290-1675.
Last updated: